- Home
- Engineering and Architecture Exams
- BITSAT Exam
BITSAT Exam 2024 - Admit Card (Out), Dates, Pattern, Syllabus, Question Paper, Admission Process
Latest Update for BITSAT
- 20 May 2024:
- 20 May 2024:
- 16 May 2024:
Stay up-to date with BITSAT News
About BITSAT 2024
BITSAT 2024: BITS Pilani has announced the BITSAT 2024 result date. The authority will declare the BITSAT result on June 1. Candidates can download the result of BITSAT 2024 on the website, bitsadmission.com. Moreover, BITS Pilani has released the BITSAT 2024 admit card for the candidates who have applied for absentee slots. BITSAT registration for board toppers commenced on May 23. The exam for the BITSAT absentee slot will be held on May 28.
BITS Pilani conducted the BITSAT 2024 exam session 1 from May 20 to 23 in two shifts. The authority issued the BITSAT 2024 admit card for session 1 on May 16. The link to download the BITSAT exam 2024 admit card has been updated on the official website. Candidates have to carry the admit card of BITSAT 2024 at the exam centre on the day of the exam. The BITSAT 2024 session 1 exam dates are May 20 to 24, 2024.
The authority concluded the BITSAT 2024 slot booking for session 1 on May 10. The link for BITSAT slot booking was available at bitsadmission.com. The BITSAT 2024 application form correction process was conducted from April 20 to 22, 2024. Registration for BITSAT 2024 concluded on April 16 on the official website.
As per the BITSAT eligibility criteria, the candidate must appear/pass class 12 in 2024 and secure a minimum aggregate of 75% marks in PCM or PCB along with a minimum of 60% in each subject to appear for the test. Moreover, the authority revised the BITSAT 2024 exam date for phase 1. Candidates can check the detailed information brochure on the official website.
BITSAT 2024 exam will be conducted online and will consist of four sections, Physics, Chemistry, Mathematics/Biology (for B.Pharm), and English Proficiency & Logical Reasoning. The exam will be of a 3-hour duration and will have 130 multiple-choice questions. Candidates must refer to the BITSAT 2024 syllabus along with the paper pattern. Each correct answer carries 3 marks and there is a negative marking of 1 mark for each incorrect answer. The exam will be conducted over several days, and candidates can choose their preferred exam date and time slot based on availability.
BITSAT 2024 Latest News and Updates
Here students can check all the BITSAT 2024 notifications as released by the authorities.
- BITS Pilani result date out.
- BITSAT 2024 admit card for absentee slot released.
- BITS Pilani opened the BITS board toppers admission registration 2024 on May 23.
- BITSAT 2024 session 1 exam has commenced on May 20, 2024.
- BITSAT 2024 admit card for session 1 has been issued.
- BITSAT slot booking concluded.
- BITSAT slot booking 2024 commenced.
- BITSAT 2024 login window activated along with the announcement of BITSAT Test city allotment.
- BITSAT 2024 login window disabled till May 3.
- BITSAT application form correction process concluded on April 22, 2024.
- BITSAT 2024 application form correction process started on April 20.
- BITSAT exam date has been revised.
- BITS Pilani registration dates extended.
- BITS Pilani entrance exam date revised.
- BITSAT registration 2024 commenced on January 15 at bitsadmission.com.
- The authorities released the BITSAT 2024 information brochure on January 14.
BITSAT 2024 Highlights
The online tests are conducted at several exam centres in India and the Dubai campus.
- The BITSAT 2024 exam will have Physics, Chemistry, English Proficiency and logical reasoning, and Mathematics/Biology parts and is of three hours duration.
- All questions will be multiple-choice questions (objective type) and based on the current NCERT syllabus.
- Candidates can select the exam centre, and the date and time for the test, at his/her convenience.
What is BITSAT Exam?
Birla Institute of Technology and Science Admission Test (BITSAT) is a computer-based entrance exam conducted by BITS Pilani for admission to undergraduate engineering programs at its campuses in Pilani, Hyderabad, and Goa. Admission of the BITSAT qualifying candidates is done through the counselling process.
The result of BITSAT will also be announced at bitsadmission.com. Qualified candidates will be eligible for the counselling and seat allotment process. The selection of candidates for admission is based on their performance in BITSAT, and those who qualify are called for counselling. During counselling, candidates are allotted seats based on their rank and availability of seats. BITS Pilani is one of the top engineering colleges in India, and the competition for admission is high. Therefore, candidates need to prepare well and score high in BITSAT to increase their chances of getting admission.
BITSAT Participating Institutes 2024
BITSAT 2024 Highlights
Full Exam Name | Birla Institute of Technology and Science Admission Test |
Short Exam Name | BITSAT |
Conducting Body | Birla Institute of Technology and Science |
Frequency of Conduct | 2 times a year |
Exam Level | University Level Exam |
Languages | English |
Mode of Application | Online |
Application Fee (General) | 3400 Rs [Online] |
Mode of Exam | Online |
Mode of Counselling | Online |
Participating Colleges | 12 |
Exam Duration | 3 Hours |
![Featured Image](jpg/bitsat.jpg)
BITSAT 2024 Important Dates
Upcoming Dates and Events
01 Jun, 2024
Result - Session 1 | Mode: Online
18 May, 2024 - 08 Jun, 2024
Application - Session II | Mode: Online Ongoing
11 Jun, 2024 - 12 Jun, 2024
Application Correction - Session II | Mode: Online
13 Jun, 2024
Test centre allotment session II | Mode: Online
15 Jun, 2024 - 17 Jun, 2024
Slot Booking - Session II | Mode: Online
23 May, 2024 - 25 Jun, 2024
Application - BITS board toppers admission | Mode: Online Ongoing
24 Jun, 2024 - 28 Jun, 2024
Exam - Session II | Mode: Online
19 Jun, 2024 - 28 Jun, 2024
Admit Card - Session II | Mode: Online
01 Jun, 2024 - 28 Jun, 2024
Counselling - Apply for admission with 12th Marks and Preferences of Programmes | Mode: Online
29 Jun, 2024 - 30 Jun, 2024
Counselling - Editing of Marks/Preferences in Application form | Mode: Online
03 Jul, 2024
Counselling - Admit list and Waitlist announcement after Iteration I. | Mode: Online
08 Jul, 2024
Counselling - Deadline for accepting the offer along with payment of fee/advance fees. | Mode: Online
11 Jul, 2024
Counselling - Announcement of admission assignment after Iteration II. | Mode: Online
15 Jul, 2024
Counselling - Deadline for payment of balance fees by candidates selected for admission from the waiting list in Iteration II. | Mode: Online
13 Jul, 2024 - 16 Jul, 2024
Counselling - Deadline for candidates who wish to withdraw their admission to submit a withdrawal request online using required credentials. | Mode: Online
19 Jul, 2024
Counselling - Announcement of admission assignment after Iteration III. | Mode: Online
22 Jul, 2024
Counselling - Deadline for payment of balance fees by candidates selected for admission from the waiting list in Iteration III. | Mode: Online
24 Jul, 2024 - 25 Jul, 2024
Counselling - Deadline for candidates who wish to withdraw their admission to submit a withdrawal request online using required credentials. | Mode: Online
30 Jul, 2024
Counselling - Reporting of candidates selected for admission in Iterations I, II, and III at their respective campuses (other than the BITS-RMIT Academy students) and their Document verification and completion of other Admission formalities. | Mode: Online
31 Jul, 2024
Counselling - Fresh-students Orientation Programme who have reported and completed their Admission formalities on July 30, 2024, at respective Campuses. Detailed information will be provided by the respective Campus. | Mode: Online
31 Jul, 2024
Counselling - Fresh-students Orientation at the respective Campuses | Mode: Online
01 Aug, 2024
Counselling - First Semester begins | Mode: Online
01 Aug, 2024
Counselling - Registration for all students at the respective Campuses | Mode: Online
02 Aug, 2024
Counselling - Class-work begins at the respective Campuses | Mode: Online
02 Aug, 2024 - 21 Aug, 2024
Counselling - Announcement of admission assignment after Iteration IV to VI and subsequent deadlines for payment of balance fees by candidates and their reporting at the respective Campuses. | Mode: Online
Past Dates and Events
27 May, 2024
Admit Card - BITSAT session 1 absentee slot exam | Mode: Online
25 May, 2024 - 26 May, 2024
Application - BITSAT session 1 absentee slot exam | Mode: Online
20 May, 2024 - 24 May, 2024
Exam - Session I | Mode: Online
16 May, 2024 - 24 May, 2024
Admit Card - Session I | Mode: Online
06 May, 2024 - 10 May, 2024
Slot Booking - Session I | Mode: Online
03 May, 2024
Test centre allotment session I | Mode: Online
20 Apr, 2024 - 22 Apr, 2024
Application Correction - Session I | Mode: Online
15 Jan, 2024 - 16 Apr, 2024
Application - Session I | Mode: Online
The authorities have released the BITSAT 2024 eligibility criteria on the official website of BITSAT at bitsasmission.com along with the official notification. The eligibility criteria of BITSAT 2024 includes details on the qualifying exam, age limit and minimum marks required for admissions, and much more.
BITSAT B.E Eligibility Criteria
The eligibility criteria for BITSAT 2024 are as follows:
Educational qualification: Candidates must have passed 10+2 or equivalent examination from a recognized board with Physics, Chemistry, and Mathematics as compulsory subjects.
Minimum marks: Candidates must have scored a minimum aggregate of 75% marks in Physics, Chemistry, and Mathematics/Biology subjects in 10+2 or equivalent examinations. For candidates who have taken Mathematics as a subject, Physics and Chemistry are compulsory subjects, and the third subject can be either Biology or Biotechnology or Computer Science or an additional subject.
Age limit: There is no age limit for appearing in BITSAT 2024, the candidates who are appearing in or have passed their 10+2 are eligible to sit in the exam.
BITSAT B.Pharma Eligibility Criteria
Candidates applying to B.Pharm courses must meet the following eligibility criteria, only then will they be considered for admission:
Qualifying Exam : The candidate must have passed 10+2 from a recognized Central or State board with Physics, Chemistry and Biology as compulsory subjects. Candidates having Mathematics in class 12 can also apply for B.Pharm program. Adequate proficiency in English is also required.
Minimum Marks in Qualifying Examination : The candidate should have scored minimum 75% marks in aggregate in Physics, Chemistry and Mathematics. Additionally, the candidate must have scored minimum 60% in each paper.
Age limit : No age limit has been specified as such, but only those candidates who are appearing in or have passed their 10+2 are eligible to sit in the exam.
BITSAT M.Sc. Eligibility Criteria
Candidates applying to integrated M.Sc programmes need to meet the following eligibility criteria:
Qualifying Exam : The candidate must have passed 10+2 from a recognized institute with Physics, Chemistry, and Mathematics as compulsory subjects and possess adequate proficiency in English. Additionally, candidates appearing for 10+2 in 2021 are also eligible.
Minimum Marks in Qualifying Examination : The candidate must score at least 75% marks in Physics, Chemistry, and Mathematics taken together. The candidate must also score minimum 60% in each paper.
Age limit : No age limit has been specified as such, but only those candidates who are appearing in or have passed their 10+2 are eligible to sit in the exam.
Mode of Application : Online
Mode of Payment : Net Banking | Credit Card | Debit Card
Candidates were able to fill out the online application form of BITSAT 2024 on the official website. The BITSAT 2024 application form includes steps like registration process, filling form, uploading documents, and payment of a fee. Students willing to apply for BITS BTech exam 2024 should check the BITSAT eligibility criteria before applying.
The application process for BITSAT 2024 is likely to be online, and candidates can follow the steps given below to apply:
- Registration: Candidates must first register themselves on the official website of BITS Pilani. They will have to provide their name, date of birth, email ID, and other details to complete the registration process. Upon successful registration, candidates will receive their login credentials on their registered email ID.
- Filling the application form: Candidates must log in to their accounts using their credentials and fill in the application form with their personal and academic details, choice of exam centre, etc. They must also upload their recent photograph and signature in the specified format.
- Uploading of documents: After filling in details in the application form, applicants have to upload the relevant documents. Aspirants have to upload scanned images of photographs and signature in the prescribed format.
Specifications to upload documents in the application form
Documents | File Size | Format |
Photograph | 4 - 100 KB | JPG/JPEG |
Signature | 1 - 50 KB | JPG/JPEG |
- Payment of application fee: Candidates must pay the BITSAT application form 2024 fees through the online payment gateway using their debit/credit card or net banking. For offline payment, the candidates have to first download the payslip and deposit the fee in a nearby ICICI bank branch. The details of the transaction have to be entered on the application form.
- Submission of application form: After completing the application form and payment of the application fee, candidates must preview and submit their application form online.
- Printing the confirmation page: Candidates must take a printout of the confirmation page after submitting the application form for future reference.
Candidates must ensure that they fulfill the eligibility criteria for BITSAT 2024 before applying for the exam. They must also keep all the necessary documents and details ready before starting the application process to avoid any errors or delays.
Application Fees
Category | Quota | Mode | Gender | Amount |
---|---|---|---|---|
OBC, ST, SC, General | Online | Male | ₹ 3400 | |
OBC, ST, SC, General | Online | Female | ₹ 2900 |
BITSAT B.E Syllabus
Physics
Units & measurement |
---|
Units (different systems of units, SI units, fundamental and derived units) |
Dimensional analysis |
Precision and significant figures |
Fundamental measurements in physics (Vernier calipers, screw gauge, physical balance etc) |
Kinematics |
---|
Properties of vectors |
Position, velocity, and acceleration vectors |
Motion with constant acceleration |
Projectile motion |
Uniform circular motion |
Relative motion |
Newton’s laws of motion |
---|
Newton’s laws (free body diagram, resolution of forces) |
Motion on an inclined plane |
Motion of blocks with pulley systems |
Circular motion-centripetal force |
Inertial and non-inertial frames |
Impulse and momentum |
---|
Definition of impulse and momentum |
Conservation of momentum |
Collisions |
Momentum of a system of particles |
Center of mass |
Work and energy |
---|
Work done by a force |
Kinetic energy and work-energy theorem |
Power |
Conservative forces and potential energy |
Conservation of mechanical energy |
Rotational motion |
---|
Description of rotation (angular displacement, angular velocity and angular acceleration) |
Rotational motion with constant angular acceleration |
Moment of inertia, parallel and perpendicular axes theorems, rotational kinetic energy |
Torque and angular momentum |
Conservation of angular momentum |
Rolling motion |
Gravitation |
---|
Newton’s law of gravitation |
Gravitational potential energy, escape velocity |
Motion of planets-Kepler’s laws, satellite motion |
Mechanics of solids and fluids |
---|
Elasticity |
Pressure, density and Archimedes’ principle |
Viscosity and surface tension |
Bernoulli’s theorem |
Oscillations |
---|
Kinematics of simple harmonic motion |
Spring mass system, simple and compound pendulum |
Forced & damped oscillations, resonance |
Waves |
---|
Progressive sinusoidal waves |
Standing waves in strings and pipes |
Superposition of waves, beats |
Doppler effect |
Heat and thermodynamics |
---|
Kinetic theory of gases |
Thermal equilibrium and temperature |
Specific heat, heat transfer-conduction, convection and radiation, thermal conductivity, Newton’s law of cooling work, heat and first law of thermodynamics |
2nd law of thermodynamics, Carnot engine-efficiency and coefficient of performance |
Electrostatics |
---|
Coulomb’s law |
Electric field (discrete and continuous charge distributions) |
Electrostatic potential and electrostatic potential energy |
Gauss’ law and its applications |
Electric dipole |
Capacitance and dielectrics (parallel plate capacitor, capacitors in series and parallel) |
Current electricity |
---|
Ohm’s law, Joule heating |
DC circuits-resistors and cells in series and parallel, Kirchoff’s laws, potentiometer and Wheatstone bridge |
Electrical resistance (resistivity, origin and temperature dependence of resistivity). |
Magnetic effect of current |
---|
Biot-Savart’s law and its applications |
Ampere’s law and its applications |
Lorentz force, force on current carrying conductors in a magnetic field |
Magnetic moment of a current loop, torque on a current loop, galvanometer and its conversion to voltmeter and ammeter |
Electromagnetic induction |
---|
Faraday’s law, Lenz’s law, eddy currents |
Self and mutual inductance |
Transformers and generators |
Alternating current (peak and RMS value) |
AC circuits, LCR circuits |
Optics |
---|
Laws of reflection and refraction |
Lenses and mirrors |
Optical instruments-telescope and microscope |
Interference-Huygen’s principle, Young’s double slit experiment |
Interference in thin films |
Diffraction due to a single slit |
Electromagnetic waves and their characteristics (only qualitative ideas), electromagnetic spectrum |
Polarization-states of polarization, Malus’ law, Brewster’s law |
Modern physics |
---|
Dual nature of light and matter-photoelectric effect, De Broglie wavelength |
Atomic models-Rutherford’s experiment, Bohr’s atomic model |
Hydrogen atom spectrum |
Radioactivity |
Nuclear reactions: Fission and fusion, binding energy |
Electronic devices |
---|
Energy bands in solids (qualitative ideas only), conductors, insulators and semiconductors |
Semiconductor diode - I-V characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator |
Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator |
Logic gates (or, and, not, nand and nor) |
Transistor as a switch |
Chemistry
States of matter |
---|
Measurement: Physical quantities and SI units, dimensional analysis, precision, significant figures |
Chemical reactions: Laws of chemical combination, Dalton’s atomic theory; mole concept; atomic, molecular and molar masses; percentage composition empirical & molecular formula; balanced chemical equations & stoichiometry |
Three states of matter, intermolecular interactions, types of bonding, melting and boiling points, gaseous state: Kinetic energy and molecular speeds; gas Laws, ideal behavior, ideal gas equation, empirical derivation of gas equation |
Avogadro number, deviation from ideal behaviour-critical temperature, liquefaction of gases, Van der Waals equation |
Liquid state: Vapour pressure, surface tension, viscosity |
Solid state: Classification; space lattices & crystal systems; unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell-cubic & hexagonal systems; close packing |
Solid state: Crystal structures-simple AB and AB2 type ionic crystals, covalent crystals-diamond & graphite, metals. Voids, number of atoms per unit cell in a cubic unit cell, Imperfections-point defects, non-stoichiometric crystals; electrical |
Solid state: Magnetic and dielectric properties; amorphous solids-qualitative description. Band theory of metals, conductors, semiconductors and insulators, and n- and p-type semiconductors |
Atomic structure |
---|
Introduction: Subatomic particles; atomic number, isotopes and isobars, Thomson’s model and its limitations, Rutherford’s picture of atom and its limitations; hydrogen atom spectrum and Bohr model and its limitations |
Quantum mechanics: Wave-particle duality-De Broglie relation, uncertainty principle; hydrogen atom: Quantum numbers and wave functions, atomic orbitals and their shapes (s, p, and d), spin quantum number |
Many electron atoms: Pauli exclusion principle; Aufbau principle and the electronic configuration of atoms, Hund’s rule |
Periodicity and bonding |
---|
Brief history of the development of periodic tables, periodic law and the modern periodic table; types of elements: s, p, d, and f blocks; periodic trends: Ionization energy, atomic, and ionic radii, inert gas radii, electron affinity |
Periodic trends: Electron affinity, electronegativity and valency |
Nomenclature of elements with atomic number greater than 100 |
Valence electrons, ionic bond: Lattice energy and Born-Haber cycle; covalent character of ionic bonds and polar character of covalent bond, bond parameters |
Molecular structure: Lewis picture & resonance structures, VSEPR model & molecular shapes |
Covalent bond: Valence bond theory-orbital overlap, directionality of bonds & hybridization (s, p, & d orbitals only), resonance; molecular orbital theory-methodology, orbital energy level diagram, bond order |
Covalent bond: Magnetic properties for homonuclear diatomic species (qualitative idea only) |
Dipole moments; hydrogen bond |
Thermodynamics |
---|
Basic concepts: Systems and surroundings; state functions; intensive & extensive properties; zeroth Law and temperature |
First law of thermodynamics: Work, internal energy, heat, enthalpy, heat capacities and specific heats, measurements of ∆U and ∆H, Enthalpies of formation, phase transformation, ionization, electron gain; thermochemistry; Hess’s law |
First law of thermodynamics: Enthalpy of bond dissociation, combustion, atomization, sublimation, solution and dilution |
Second law: Spontaneous and reversible processes; entropy; Gibbs free energy related to spontaneity and non-spontaneity, non-mechanical work; standard free energies of formation, free energy change and chemical equilibrium |
Third law: Introduction |
Physical and chemical equilibria |
---|
Concentration units: Mole fraction, molarity, and molality |
Solutions: Solubility of solids and gases in liquids, vapour pressure, Raoult’s law, relative lowering of vapor pressure, depression in freezing point; elevation in boiling point; osmotic pressure, determination of molecular mass |
Solutions: Solid solutions, abnormal molecular mass, Van’t Hoff factor |
Equilibrium: Dynamic nature of equilibrium, law of mass action |
Physical equilibrium: Equilibria involving physical changes (solid-liquid, liquid-gas, solid-gas) |
Chemical equilibria: Equilibrium constants (KP, KC), factors affecting equilibrium, Le-Chatelier’s principle |
Ionic equilibria: Strong and weak electrolytes, acids and bases (Arrhenius, Lewis, Lowry and Bronsted) and their dissociation; degree of ionization, ionization of water; ionization of polybasic acids, pH; buffer solutions |
Ionic equilibria: Henderson equation, acid-base titrations; hydrolysis; solubility product of sparingly soluble salts; common Ion effect |
Factors affecting equilibria: Concentration, temperature, pressure, catalysts, significance of ΔG and ΔG0 in chemical equilibria |
Electrochemistry |
---|
Redox reactions: Oxidation-reduction reactions (electron transfer concept); oxidation number; balancing of redox reactions; electrochemical cells and cell reactions; standard electrode potentials; EMF of galvanic cells; Nernst equation |
Redox reactions: Factors affecting the electrode potential; Gibbs energy change and cell potential; secondary cells; dry cells, fuel cells; corrosion and its prevention |
Electrolytic conduction: Electrolytic conductance; specific and molar conductivities; variations of conductivity with concentration, Kohlrausch’s law and its application, electrolysis, Faraday’s laws of electrolysis |
Electrolytic conduction: Electrode potential and electrolysis |
Chemical kinetics |
---|
Aspects of kinetics: Rate and Rate expression of a reaction; rate constant; order and molecularity of the reaction; integrated rate expressions and half-life for zero and first order reactions |
Factor affecting the rate of the reactions: Concentration of the reactants, catalyst; size of particles, temperature dependence of rate constant concept of collision theory (elementary idea, no mathematical treatment); activation energy |
Factor affecting the rate of the reactions: Arrhenius equation |
Surface chemistry: Adsorption-physisorption and chemisorption; factors affecting adsorption of gasses on solids; catalysis-homogeneous and heterogeneous, activity and selectivity-enzyme catalysis; colloidal state: Distinction between true solutions |
Surface chemistry: Colloidal state-colloids and suspensions; lyophilic, lyophobic multi molecular and macromolecular colloids; properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulations; emulsions-types of emulsions |
Hydrogen and s-block elements |
---|
Hydrogen: Element: unique position in periodic table, occurrence, isotopes; dihydrogen-preparation, properties, reactions, and uses; Molecular, saline, ionic, covalent, interstitial hydrides; water: Properties; structure and aggregation of water molecules |
Hydrogen: Water-heavy water; hydrogen peroxide-preparation, reaction, structure & use, hydrogen as a fuel |
S-block elements: Abundance and occurrence; anomalous properties of the first elements in each group; diagonal relationships; trends in the variation of properties (ionization energy, atomic & ionic radii) |
Alkali metals: Lithium, sodium and potassium-occurrence, extraction, reactivity, and electrode potentials; biological importance; reactions with oxygen, hydrogen, halogens and water; Basic nature of oxides and hydroxides; halides |
Alkali metals: Properties and uses of compounds such as NaCl, Na2CO3, NaHCO3, NaOH, KCl, and KOH |
Alkaline earth metals: Magnesium and calcium-occurrence, extraction, reactivity and electrode potentials; reactions with O2, H2O, H2 and halogens; solubility and thermal stability of oxo salts; biological importance of Ca and Mg |
Alkaline earth metals: Preparation, properties and uses of important compounds such as CaO, Ca(OH)2, Plaster of Paris, MgSO4, MgCl2, CaCO3, and CaSO4 |
p-, d-, and f-block elements |
---|
General: Abundance, distribution, physical and chemical properties, isolation and uses of elements; trends in chemical reactivity of elements of a group; electronic configuration, oxidation states; anomalous properties of first element of each group |
Group 13 elements: Boron; properties and uses of borax, boric acid, boron hydrides & halides. Reaction of aluminum with acids and alkalis |
Group 14 elements: Carbon-carbon catenation, physical & chemical properties, uses, allotropes (graphite, diamond, fullerenes), oxides, halides and sulphides, carbides; silicon: Silica, silicates, silicone, silicon tetrachloride, zeolites, and their uses |
Group 15 elements: Dinitrogen; preparation, reactivity and uses of nitrogen; industrial and biological nitrogen fixation; compound of nitrogen; ammonia: Haber’s process, properties and reactions; oxides of nitrogen and their structures |
Group 15 elements: Properties and Ostwald’s process of nitric acid production; fertilizers-NPK type; production of phosphorus; allotropes of phosphorus; preparation, structure and properties of hydrides, oxides |
Group 15 elements: Oxoacids (elementary idea only) and halides of phosphorus, phosphine |
Group 16 elements: Isolation and chemical reactivity of dioxygen; acidic, basic and amphoteric oxides; preparation, structure and properties of ozone; allotropes of sulphur; preparation/production properties and uses of sulphur dioxide and sulphuric acid |
Group 16 elements: Structure and properties of oxides, oxoacids (structures only) |
Group 17 and group 18 elements: Structure and properties of hydrides, oxides, oxoacids of halogens (structures only); preparation, properties & uses of chlorine & HCl; interhalogen compounds; bleaching powder |
Group 17 and group 18 elements: Uses of group 18 elements, preparation, structure and reactions of xenon fluorides, oxides, and oxoacids |
D-block elements: General trends in the chemistry of first row transition elements; metallic character; oxidation state; ionization enthalpy; ionic radii; color; catalytic properties; magnetic properties; interstitial compounds |
D-block elements: Occurrence and extraction of iron, copper, silver, zinc, and mercury; alloy formation; steel and some important alloys; preparation and properties of K2Cr2O7, KMnO4 |
F-Block elements: Lanthanoids and actinoids; oxidation states and chemical reactivity of lanthanoids compounds; lanthanide contraction and its consequences, comparison of actinoids and lanthanoids |
Coordination compounds: Coordination number; ligands; Werner’s coordination theory; IUPAC nomenclature |
Coordination compounds: Application and importance of coordination compounds (in qualitative analysis, extraction of metals and biological systems e.g. chlorophyll, vitamin B12, and hemoglobin); bonding: valence-bond approach |
Coordination compounds: Bonding-crystal field theory (qualitative); isomerism including stereoisomerisms |
Principles of organic chemistry and hydrocarbons |
---|
Classification: General Introduction, classification based on functional groups, trivial and IUPAC nomenclature. Methods of purification: Qualitative and quantitative |
Electronic displacement in a covalent bond: Inductive, resonance effects, and hyperconjugation; free radicals; carbocations, carbanions, nucleophiles and electrophiles; types of organic reactions, free radical halogenations |
Electronic displacement in a covalent bond: Inductive, resonance effects, and hyperconjugation; free radicals; carbocations, carbanions, nucleophiles and electrophiles; types of organic reactions, free radial halogenations |
Alkenes and alkynes: Structure of double and triple bonded compounds; general methods of preparation and reactions, physical properties, electrophilic and free radical additions, addition of hydrogen, halogen, water, hydrogen halides |
Alkenes and alkynes: Markovnikov’s addition and peroxide effect, ozonolysis, oxidation, mechanism of electrophilic addition; acidic character of alkynes and (1,2 and 1,4) addition to dienes |
Aromatic hydrocarbons: Sources; properties; isomerism; resonance delocalization; aromaticity; polynuclear hydrocarbons; IUPAC nomenclature; mechanism of electrophilic substitution reaction |
Aromatic hydrocarbons: Directive influence and effect of substituents on reactivity; carcinogenicity and toxicity |
Haloalkanes and haloarenes: Physical properties, nomenclature, optical rotation, chemical reactions and mechanism of substitution reaction |
Haloalkanes and haloarenes: Uses and environmental effects; di, tri, tetrachloromethanes, iodoform, freon and DDT |
Stereochemistry |
---|
Conformations: Ethane conformations; Newman and Sawhorse projections |
Geometrical isomerism in alkenes |
Organic compounds with functional groups containing oxygen and nitrogen |
---|
General: Nomenclature, electronic structure, important methods of preparation, identification, important reactions, physical and chemical properties, uses of alcohols, phenols, ethers, aldehydes, ketones |
General: Carboxylic acids, nitro compounds, amines, diazonium salts, cyanides and isocyanides |
Specific: Reactivity of alpha-hydrogen in carbonyl compounds, effect of substituents on alpha carbon on acid strength, comparative reactivity of acid derivatives, mechanism of nucleophilic addition and dehydration |
Specific: Basic character of amines, methods of preparation, and their separation, importance of diazonium salts in synthetic organic chemistry |
Biological, industrial and environmental chemistry |
---|
Carbohydrates: Classification; monosaccharides; structures of pentoses and hexoses; simple chemical reactions of glucose, disaccharides: Reducing and non-reducing sugars- sucrose, maltose and lactose |
Carbohydrates: Polysaccharides-elementary idea of structures of starch, cellulose and glycogen |
Proteins: Amino acids; peptide bond; polypeptides; primary structure of proteins; simple idea of secondary, tertiary and quaternary structures of proteins; denaturation of proteins and enzymes |
Nucleic acids: Types of nucleic acids; primary building blocks of nucleic acids (chemical composition of DNA & RNA); primary structure of DNA and its double helix |
Vitamins: Classification, structure, functions in biosystems; hormones |
Polymers: Classification of polymers; general methods of polymerization; molecular mass of polymers; biopolymers and biodegradable polymers; methods of polymerization (free radical, cationic and anionic addition polymerizations) |
Polymers: Copolymerization-natural rubber; vulcanization of rubber; synthetic rubbers. Condensation polymers. Some important polymers: Natural and synthetic like polythene, nylon, polyesters, bakelite, and rubber |
Pollution: Environmental pollutants; soil, water and air pollution; chemical reactions in atmosphere; smog; major atmospheric pollutants; acid rain; ozone and its reactions; depletion of ozone layer and its effects; industrial air pollution |
Pollution: Greenhouse effect and global warming; green chemistry, study for control of environmental pollution |
Chemicals in medicine, health-care and food: Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, anti-fertility drugs, antihistamines, antibiotics, antacids; preservatives, artificial sweetening agents, antioxidants |
Chemicals in medicine, health-care and food: Soaps and detergents |
Theoretical principles of experimental chemistry |
---|
Volumetric analysis: Principles; standard solutions of sodium carbonate and oxalic acid; acid-base titrations; redox reactions involving KI, H2SO4, Na2SO3, Na2S2O3 and H2S; potassium permanganate in acidic, basic and neutral media |
Volumetric analysis: Titrations of oxalic acid, ferrous ammonium sulphate with KMnO4, K2Cr2O7/ Na2S2O3, Cu(II)/ Na2S2O3 |
Qualitative analysis of inorganic salts: Principles in the determination of the cations Pb2+, Cu2+, As3+, Mn2+, Al3+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+, NH4 +, Fe3+, Ni2+ |
Qualitative analysis of inorganic salts: Principles in the determination of the anions CO3 2-, S2-, SO4 2-, SO3 2-, NO2-, NO3-, Cl-, Br-, I-, PO4 3-, CH3COO-, C2O4 2- |
Physical chemistry experiments: Preparation and crystallization of alum, copper sulphate, benzoic acid ferrous sulphate, double salt of alum and ferrous sulphate, potassium ferric sulphate, temperature vs. solubility |
Physical chemistry experiments: Study of pH charges by common ion effect in case of weak acids and weak bases, pH measurements of some solutions obtained from fruit juices |
Physical chemistry experiments: Solutions of known and varied concentrations of acids, bases, and salts using pH paper or universal indicator, lyophilic and lyophobic sols, dialysis, role of emulsifying agents in emulsification |
Physical chemistry experiments: Equilibrium studies involving ferric and thiocyanate ions-(i) [Co(H2O)6] 2+ and chloride ions, enthalpy determination for strong acid vs. strong base neutralization reaction |
Physical chemistry experiments: Equilibrium studies involving ferric and thiocyanate ions-(ii) hydrogen bonding interaction between acetone and chloroform; rates of the reaction between-(i) sodium thiosulphate and hydrochloric acid |
Physical chemistry experiments: Rates of the reaction between-(ii) potassium iodate and sodium sulphite, (iii) iodide vs. hydrogen peroxide, concentration and temperature effects in these reactions |
Purification methods: Filtration, crystallization, sublimation, distillation, differential extraction, and chromatography. Principles of melting point and boiling point determination; principles of paper chromatographic separation-Rf values |
Qualitative analysis of organic compounds: Detection of nitrogen, sulphur, phosphorous and halogens; detection of carbohydrates, fats and proteins in foodstuff; detection of alcoholic, phenolic, aldehydic, ketonic, carboxylic |
Qualitative analysis of organic compounds: Amino groups and unsaturation |
Principles of organic chemistry experiments: Preparation of, acetanilide, p-nitro acetanilide, di-benzyl acetone, aniline yellow, beta-naphthol-aniline dye |
Basic laboratory technique: Cutting glass tube and glass rod, bending a glass tube, drawing out a glass jet, boring of cork |
English proficiency
Grammar |
---|
Determiners, prepositions, modals, adjectives, relative pronouns |
Agreement, time and tense |
Parallel construction |
Voice, transformation |
Question tags, relative clauses |
Vocabulary |
---|
Odd word, one word, spelling & word formation, homophones |
Contextual meanings of vocabulary (definitions, academic vocabulary, connotation) |
Synonyms, antonyms, collocations |
Phrasal verbs & idioms |
Analogy |
Reading comprehension |
---|
Content/ideas (finding main ideas, reaching conclusions using supporting evidence, anticipation of ideas, distinguishing facts from opinions) |
Vocabulary (figurative usage: Metaphors and similes; select CLOZE) |
Summary (findings from options the correct summary) |
Referents |
Reorganization of information (Jigsaw Reading) |
Composition |
---|
Rearrangement (word order; logical organization of paragraph) |
Paragraph & unity (identifying the correct topic sentence;) |
Linkers/connectives |
Logical reasoning
Verbal reasoning |
---|
Analogy: Analogy means correspondence. In the questions based on analogy, a particular relationship is given and another similar relationship has to be identified from the alternatives provided |
Classification: Classification means to assort the items of a given group on the basis of certain common quality they possess and then spot the odd option out |
Series completion: Here series of numbers or letters are given and one is asked to either complete the series or find out the wrong part in the series |
Logical deduction: Reading passage-Here a brief passage is given and based on the passage the candidate is required to identify the correct or incorrect logical conclusions |
Chart logic: Here a chart or a table is given that is partially filled in and asks to complete it in accordance with the information given either in the chart/table or in the question |
Nonverbal reasoning |
---|
Pattern perception: Here a certain pattern is given and generally a quarter is left blank. The candidate is required to identify the correct quarter from the given options |
Figure formation and analysis: Here the candidate is required to analyze and form a figure from the various given parts |
Paper cutting: Here the candidate analyses a pattern that is formed when a folded piece of paper is cut into a definite design |
Figure matrix: Here the candidate is given more than one set of figures in the form of a matrix, which follow the same rule. The candidate is required to follow the rule and identify the missing figure |
Rule detection: Here a particular rule is given and the candidate is required to select from the given sets of figures, a set of figures, which obey the rule and form the correct series |
Mathematics
Algebra |
---|
Complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, roots of complex numbers, geometric interpretations; fundamental theorem of algebra |
Theory of quadratic equations, quadratic equations in real and complex number system and their solutions |
Arithmetic and geometric progressions, arithmetic, geometric and arithmetico geometric series, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers |
Logarithms and their properties |
Exponential series |
Permutations and combinations, permutations as an arrangement and combination as selection, simple applications |
Binomial theorem for a positive integral index, properties of binomial coefficients, Pascal’s triangle |
Matrices and determinants of order two or three, properties and evaluation of determinants, addition and multiplication of matrices, adjoint and inverse of matrices, solutions of simultaneous linear equations in two or three variables |
Elementary row and column operations of matrices, types of matrices, applications of determinants in finding the area of triangles |
Sets, relations and functions, algebra of sets applications, equivalence relations, mappings, one to one, into and onto mappings, composition of mappings, binary operation, inverse of function |
Functions of real variables like polynomial, modulus, signum and greatest integer |
Mathematical reasoning and methods of proofs, mathematically acceptable statements |
Connecting words/phrases-consolidating the understanding of “if and only if (necessary and sufficient) condition”, “implies”, “and/or”, “implied” by”, “and”, “or”, “there exists” and through variety of examples related to real life and mathematics |
Validating the statements involving the connecting words-difference between contradiction, converse and contrapositive, mathematical induction |
Linear inequalities, solution of linear inequalities in one variable (algebraic) and two variables (graphical) |
Trigonometry |
---|
Measurement of angles in radians and degrees, positive and negative angles, trigonometric ratios, functions with their graphs and identities |
Solution of trigonometric equations |
Inverse trigonometric functions |
Two-dimensional coordinate geometry |
---|
Cartesian coordinates, distance between two points, section formulae, shift of origin |
Straight lines and pair of straight lines: Equation of straight lines in various forms, angle between two lines, distance of a point from a line, lines through the point of intersection of two given lines |
Straight lines and pair of straight lines: Equation of the bisector of the angle between two lines, concurrent lines |
Circles: Equation of circle in standard form, parametric equations of a circle |
Conic sections: Parabola, ellipse and hyperbola their eccentricity, directrices & foci |
Three dimensional coordinate geometry |
---|
Coordinate axes and coordinate planes, distance between two points, section formula, direction cosines and direction ratios, equation of a straight line in space and skew lines |
Angle between two lines whose direction ratios are given, shortest distance between two lines |
Equation of a plane, distance of a point from a plane, condition for coplanarity of three lines, angles between two planes, angle between a line and a plane |
Differential calculus |
---|
Domain and range of a real valued function, limits and continuity of the sum, difference, product and quotient of two functions, differentiability |
Derivative of different types of functions (polynomial, rational, trigonometric, inverse trigonometric, exponential, logarithmic, implicit functions), derivative of the sum, difference, product and quotient of two functions, chain rule, parametric form |
Geometric interpretation of derivative, tangents and normal |
Increasing and decreasing functions, maxima and minima of a function |
Rolle’s theorem, mean value theorem and intermediate value theorem |
Integral calculus |
---|
Integration as the inverse process of differentiation, indefinite integrals of standard functions |
Methods of integration: Integration by substitution, integration by parts, integration by partial fractions, and integration by trigonometric identities |
Definite integrals and their properties, fundamental theorem of integral calculus, applications in finding areas under simple curves |
Application of definite integrals to the determination of areas of regions bounded by simple curves |
Ordinary differential equations |
---|
Order and degree of a differential equation, formulation of a differential equation whole general solution is given, variables separable method |
Solution of homogeneous differential equations of first order and first degree |
Linear first order differential equations |
Probability |
---|
Various terminology in probability, axiomatic and other approaches of probability, addition and multiplication rules of probability |
Conditional probability, total probability and Baye’s theorem |
Independent events |
Discrete random variables and distributions with mean and variance |
Vectors |
---|
Direction ratio/cosines of vectors, addition of vectors, scalar multiplication, position vector of a point dividing a line segment in a given ratio |
Dot and cross products of two vectors, projection of a vector on a line |
Scalar triple products and their geometrical interpretations |
Statistics |
---|
Measures of dispersion |
Analysis of frequency distributions with equal means but different variances |
Linear programming |
---|
Various terminology and formulation of linear Programming |
Solution of linear programming using graphical method, feasible and infeasible regions, feasible and infeasible solutions, optimal feasible solutions (upto three non trivial constraints) |
Mathematical modeling |
---|
Formulation of simple real life problem, solution using matrices, calculus and linear programming |
BITSAT B.Pharma Syllabus
Physics
Units & measurement |
---|
Units (different systems of units, SI units, fundamental and derived units) |
Dimensional analysis |
Precision and significant figures |
Fundamental measurements in physics (Vernier calipers, screw gauge, physical balance etc) |
Kinematics |
---|
Properties of vectors |
Position, velocity, and acceleration vectors |
Motion with constant acceleration |
Projectile motion |
Uniform circular motion |
Relative motion |
Newton’s laws of motion |
---|
Newton’s laws (free body diagram, resolution of forces) |
Motion on an inclined plane |
Motion of blocks with pulley systems |
Circular motion-centripetal force |
Inertial and non-inertial frames |
Impulse and momentum |
---|
Definition of impulse and momentum |
Conservation of momentum |
Collisions |
Momentum of a system of particles |
Center of mass |
Work and energy |
---|
Work done by a force |
Kinetic energy and work-energy theorem |
Power |
Conservative forces and potential energy |
Conservation of mechanical energy |
Rotational motion |
---|
Description of rotation (angular displacement, angular velocity and angular acceleration) |
Rotational motion with constant angular acceleration |
Moment of inertia, parallel and perpendicular axes theorems, rotational kinetic energy |
Torque and angular momentum |
Conservation of angular momentum |
Rolling motion |
Gravitation |
---|
Newton’s law of gravitation |
Gravitational potential energy, escape velocity |
Motion of planets-Kepler’s laws, satellite motion |
Mechanics of solids and fluids |
---|
Elasticity |
Pressure, density and Archimedes’ principle |
Viscosity and surface tension |
Bernoulli’s theorem |
Oscillations |
---|
Kinematics of simple harmonic motion |
Spring mass system, simple and compound pendulum |
Forced & damped oscillations, resonance |
Waves |
---|
Progressive sinusoidal waves |
Standing waves in strings and pipes |
Superposition of waves, beats |
Doppler effect |
Heat and thermodynamics |
---|
Kinetic theory of gases |
Thermal equilibrium and temperature |
Specific heat, heat transfer-conduction, convection and radiation, thermal conductivity, Newton’s law of cooling work, heat and first law of thermodynamics |
2nd law of thermodynamics, Carnot engine-efficiency and coefficient of performance |
Electrostatics |
---|
Coulomb’s law |
Electric field (discrete and continuous charge distributions) |
Electrostatic potential and electrostatic potential energy |
Gauss’ law and its applications |
Electric dipole |
Capacitance and dielectrics (parallel plate capacitor, capacitors in series and parallel) |
Current electricity |
---|
Ohm’s law, Joule heating |
DC circuits-resistors and cells in series and parallel, Kirchoff’s laws, potentiometer and Wheatstone bridge |
Electrical resistance (resistivity, origin and temperature dependence of resistivity). |
Magnetic effect of current |
---|
Biot-Savart’s law and its applications |
Ampere’s law and its applications |
Lorentz force, force on current carrying conductors in a magnetic field |
Magnetic moment of a current loop, torque on a current loop, galvanometer and its conversion to voltmeter and ammeter |
Electromagnetic induction |
---|
Faraday’s law, Lenz’s law, eddy currents |
Self and mutual inductance |
Transformers and generators |
Alternating current (peak and RMS value) |
AC circuits, LCR circuits |
Optics |
---|
Laws of reflection and refraction |
Lenses and mirrors |
Optical instruments-telescope and microscope |
Interference-Huygen’s principle, Young’s double slit experiment |
Interference in thin films |
Diffraction due to a single slit |
Electromagnetic waves and their characteristics (only qualitative ideas), electromagnetic spectrum |
Polarization-states of polarization, Malus’ law, Brewster’s law |
Modern physics |
---|
Dual nature of light and matter-photoelectric effect, De Broglie wavelength |
Atomic models-Rutherford’s experiment, Bohr’s atomic model |
Hydrogen atom spectrum |
Radioactivity |
Nuclear reactions: Fission and fusion, binding energy |
Electronic devices |
---|
Energy bands in solids (qualitative ideas only), conductors, insulators and semiconductors |
Semiconductor diode - I-V characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator |
Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator |
Logic gates (or, and, not, nand and nor) |
Transistor as a switch |
Chemistry
States of matter |
---|
Measurement: Physical quantities and SI units, dimensional analysis, precision, significant figures |
Chemical reactions: Laws of chemical combination, Dalton’s atomic theory; mole concept; atomic, molecular and molar masses; percentage composition empirical & molecular formula; balanced chemical equations & stoichiometry |
Three states of matter, intermolecular interactions, types of bonding, melting and boiling points, gaseous state: Kinetic energy and molecular speeds; gas Laws, ideal behavior, ideal gas equation, empirical derivation of gas equation |
Avogadro number, deviation from ideal behaviour-critical temperature, liquefaction of gases, Van der Waals equation |
Liquid state: Vapour pressure, surface tension, viscosity |
Solid state: Classification; space lattices & crystal systems; unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell-cubic & hexagonal systems; close packing |
Solid state: Crystal structures-simple AB and AB2 type ionic crystals, covalent crystals-diamond & graphite, metals. Voids, number of atoms per unit cell in a cubic unit cell, Imperfections-point defects, non-stoichiometric crystals; electrical |
Solid state: Magnetic and dielectric properties; amorphous solids-qualitative description. Band theory of metals, conductors, semiconductors and insulators, and n- and p-type semiconductors |
Atomic structure |
---|
Introduction: Subatomic particles; atomic number, isotopes and isobars, Thomson’s model and its limitations, Rutherford’s picture of atom and its limitations; hydrogen atom spectrum and Bohr model and its limitations |
Quantum mechanics: Wave-particle duality-De Broglie relation, uncertainty principle; hydrogen atom: Quantum numbers and wave functions, atomic orbitals and their shapes (s, p, and d), spin quantum number |
Many electron atoms: Pauli exclusion principle; Aufbau principle and the electronic configuration of atoms, Hund’s rule |
Periodicity and bonding |
---|
Brief history of the development of periodic tables, periodic law and the modern periodic table; types of elements: s, p, d, and f blocks; periodic trends: Ionization energy, atomic, and ionic radii, inert gas radii, electron affinity |
Periodic trends: Electron affinity, electronegativity and valency |
Nomenclature of elements with atomic number greater than 100 |
Valence electrons, ionic bond: Lattice energy and Born-Haber cycle; covalent character of ionic bonds and polar character of covalent bond, bond parameters |
Molecular structure: Lewis picture & resonance structures, VSEPR model & molecular shapes |
Covalent bond: Valence bond theory-orbital overlap, directionality of bonds & hybridization (s, p, & d orbitals only), resonance; molecular orbital theory-methodology, orbital energy level diagram, bond order |
Covalent bond: Magnetic properties for homonuclear diatomic species (qualitative idea only) |
Dipole moments; hydrogen bond |
Thermodynamics |
---|
Basic concepts: Systems and surroundings; state functions; intensive & extensive properties; zeroth Law and temperature |
First law of thermodynamics: Work, internal energy, heat, enthalpy, heat capacities and specific heats, measurements of ∆U and ∆H, Enthalpies of formation, phase transformation, ionization, electron gain; thermochemistry; Hess’s law |
First law of thermodynamics: Enthalpy of bond dissociation, combustion, atomization, sublimation, solution and dilution |
Second law: Spontaneous and reversible processes; entropy; Gibbs free energy related to spontaneity and non-spontaneity, non-mechanical work; standard free energies of formation, free energy change and chemical equilibrium |
Third law: Introduction |
Physical and chemical equilibria |
---|
Concentration units: Mole fraction, molarity, and molality |
Solutions: Solubility of solids and gases in liquids, vapour pressure, Raoult’s law, relative lowering of vapor pressure, depression in freezing point; elevation in boiling point; osmotic pressure, determination of molecular mass |
Solutions: Solid solutions, abnormal molecular mass, Van’t Hoff factor |
Equilibrium: Dynamic nature of equilibrium, law of mass action |
Physical equilibrium: Equilibria involving physical changes (solid-liquid, liquid-gas, solid-gas) |
Chemical equilibria: Equilibrium constants (KP, KC), factors affecting equilibrium, Le-Chatelier’s principle |
Ionic equilibria: Strong and weak electrolytes, acids and bases (Arrhenius, Lewis, Lowry and Bronsted) and their dissociation; degree of ionization, ionization of water; ionization of polybasic acids, pH; buffer solutions |
Ionic equilibria: Henderson equation, acid-base titrations; hydrolysis; solubility product of sparingly soluble salts; common Ion effect |
Factors affecting equilibria: Concentration, temperature, pressure, catalysts, significance of ΔG and ΔG0 in chemical equilibria |
Electrochemistry |
---|
Redox reactions: Oxidation-reduction reactions (electron transfer concept); oxidation number; balancing of redox reactions; electrochemical cells and cell reactions; standard electrode potentials; EMF of galvanic cells; Nernst equation |
Redox reactions: Factors affecting the electrode potential; Gibbs energy change and cell potential; secondary cells; dry cells, fuel cells; corrosion and its prevention |
Electrolytic conduction: Electrolytic conductance; specific and molar conductivities; variations of conductivity with concentration, Kohlrausch’s law and its application, electrolysis, Faraday’s laws of electrolysis |
Electrolytic conduction: Electrode potential and electrolysis |
Chemical kinetics |
---|
Aspects of kinetics: Rate and Rate expression of a reaction; rate constant; order and molecularity of the reaction; integrated rate expressions and half-life for zero and first order reactions |
Factor affecting the rate of the reactions: Concentration of the reactants, catalyst; size of particles, temperature dependence of rate constant concept of collision theory (elementary idea, no mathematical treatment); activation energy |
Factor affecting the rate of the reactions: Arrhenius equation |
Surface chemistry: Adsorption-physisorption and chemisorption; factors affecting adsorption of gasses on solids; catalysis-homogeneous and heterogeneous, activity and selectivity-enzyme catalysis; colloidal state: Distinction between true solutions |
Surface chemistry: Colloidal state-colloids and suspensions; lyophilic, lyophobic multi molecular and macromolecular colloids; properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulations; emulsions-types of emulsions |
Hydrogen and s-block elements |
---|
Hydrogen: Element: unique position in periodic table, occurrence, isotopes; dihydrogen-preparation, properties, reactions, and uses; Molecular, saline, ionic, covalent, interstitial hydrides; water: Properties; structure and aggregation of water molecules |
Hydrogen: Water-heavy water; hydrogen peroxide-preparation, reaction, structure & use, hydrogen as a fuel |
S-block elements: Abundance and occurrence; anomalous properties of the first elements in each group; diagonal relationships; trends in the variation of properties (ionization energy, atomic & ionic radii) |
Alkali metals: Lithium, sodium and potassium-occurrence, extraction, reactivity, and electrode potentials; biological importance; reactions with oxygen, hydrogen, halogens and water; Basic nature of oxides and hydroxides; halides |
Alkali metals: Properties and uses of compounds such as NaCl, Na2CO3, NaHCO3, NaOH, KCl, and KOH |
Alkaline earth metals: Magnesium and calcium-occurrence, extraction, reactivity and electrode potentials; reactions with O2, H2O, H2 and halogens; solubility and thermal stability of oxo salts; biological importance of Ca and Mg |
Alkaline earth metals: Preparation, properties and uses of important compounds such as CaO, Ca(OH)2, Plaster of Paris, MgSO4, MgCl2, CaCO3, and CaSO4 |
p-, d-, and f-block elements |
---|
General: Abundance, distribution, physical and chemical properties, isolation and uses of elements; trends in chemical reactivity of elements of a group; electronic configuration, oxidation states; anomalous properties of first element of each group |
Group 13 elements: Boron; properties and uses of borax, boric acid, boron hydrides & halides. Reaction of aluminum with acids and alkalis |
Group 14 elements: Carbon-carbon catenation, physical & chemical properties, uses, allotropes (graphite, diamond, fullerenes), oxides, halides and sulphides, carbides; silicon: Silica, silicates, silicone, silicon tetrachloride, zeolites, and their uses |
Group 15 elements: Dinitrogen; preparation, reactivity and uses of nitrogen; industrial and biological nitrogen fixation; compound of nitrogen; ammonia: Haber’s process, properties and reactions; oxides of nitrogen and their structures |
Group 15 elements: Properties and Ostwald’s process of nitric acid production; fertilizers-NPK type; production of phosphorus; allotropes of phosphorus; preparation, structure and properties of hydrides, oxides |
Group 15 elements: Oxoacids (elementary idea only) and halides of phosphorus, phosphine |
Group 16 elements: Isolation and chemical reactivity of dioxygen; acidic, basic and amphoteric oxides; preparation, structure and properties of ozone; allotropes of sulphur; preparation/production properties and uses of sulphur dioxide and sulphuric acid |
Group 16 elements: Structure and properties of oxides, oxoacids (structures only) |
Group 17 and group 18 elements: Structure and properties of hydrides, oxides, oxoacids of halogens (structures only); preparation, properties & uses of chlorine & HCl; interhalogen compounds; bleaching powder |
Group 17 and group 18 elements: Uses of group 18 elements, preparation, structure and reactions of xenon fluorides, oxides, and oxoacids |
D-block elements: General trends in the chemistry of first row transition elements; metallic character; oxidation state; ionization enthalpy; ionic radii; color; catalytic properties; magnetic properties; interstitial compounds |
D-block elements: Occurrence and extraction of iron, copper, silver, zinc, and mercury; alloy formation; steel and some important alloys; preparation and properties of K2Cr2O7, KMnO4 |
F-Block elements: Lanthanoids and actinoids; oxidation states and chemical reactivity of lanthanoids compounds; lanthanide contraction and its consequences, comparison of actinoids and lanthanoids |
Coordination compounds: Coordination number; ligands; Werner’s coordination theory; IUPAC nomenclature |
Coordination compounds: Application and importance of coordination compounds (in qualitative analysis, extraction of metals and biological systems e.g. chlorophyll, vitamin B12, and hemoglobin); bonding: valence-bond approach |
Coordination compounds: Bonding-crystal field theory (qualitative); isomerism including stereoisomerisms |
Principles of organic chemistry and hydrocarbons |
---|
Classification: General Introduction, classification based on functional groups, trivial and IUPAC nomenclature. Methods of purification: Qualitative and quantitative |
Electronic displacement in a covalent bond: Inductive, resonance effects, and hyperconjugation; free radicals; carbocations, carbanions, nucleophiles and electrophiles; types of organic reactions, free radical halogenations |
Alkenes and alkynes: Structure of double and triple bonded compounds; general methods of preparation and reactions, physical properties, electrophilic and free radical additions, addition of hydrogen, halogen, water, hydrogen halides |
Alkenes and alkynes: Markovnikov’s addition and peroxide effect, ozonolysis, oxidation, mechanism of electrophilic addition; acidic character of alkynes and (1,2 and 1,4) addition to dienes |
Aromatic hydrocarbons: Sources; properties; isomerism; resonance delocalization; aromaticity; polynuclear hydrocarbons; IUPAC nomenclature; mechanism of electrophilic substitution reaction |
Aromatic hydrocarbons: Directive influence and effect of substituents on reactivity; carcinogenicity and toxicity |
Haloalkanes and haloarenes: Physical properties, nomenclature, optical rotation, chemical reactions and mechanism of substitution reaction |
Haloalkanes and haloarenes: Uses and environmental effects; di, tri, tetrachloromethanes, iodoform, freon and DDT |
Stereochemistry |
---|
Conformations: Ethane conformations; Newman and Sawhorse projections |
Geometrical isomerism in alkenes |
Organic compounds with functional groups containing oxygen and nitrogen |
---|
General: Nomenclature, electronic structure, important methods of preparation, identification, important reactions, physical and chemical properties, uses of alcohols, phenols, ethers, aldehydes, ketones |
General: Carboxylic acids, nitro compounds, amines, diazonium salts, cyanides and isocyanides |
Specific: Reactivity of alpha-hydrogen in carbonyl compounds, effect of substituents on alpha carbon on acid strength, comparative reactivity of acid derivatives, mechanism of nucleophilic addition and dehydration |
Specific: Basic character of amines, methods of preparation, and their separation, importance of diazonium salts in synthetic organic chemistry |
Biological, industrial and environmental chemistry |
---|
Carbohydrates: Classification; monosaccharides; structures of pentoses and hexoses; simple chemical reactions of glucose, disaccharides: Reducing and non-reducing sugars- sucrose, maltose and lactose |
Carbohydrates: Polysaccharides-elementary idea of structures of starch, cellulose and glycogen |
Proteins: Amino acids; peptide bond; polypeptides; primary structure of proteins; simple idea of secondary, tertiary and quaternary structures of proteins; denaturation of proteins and enzymes |
Nucleic acids: Types of nucleic acids; primary building blocks of nucleic acids (chemical composition of DNA & RNA); primary structure of DNA and its double helix |
Vitamins: Classification, structure, functions in biosystems; hormones |
Polymers: Classification of polymers; general methods of polymerization; molecular mass of polymers; biopolymers and biodegradable polymers; methods of polymerization (free radical, cationic and anionic addition polymerizations) |
Polymers: Copolymerization-natural rubber; vulcanization of rubber; synthetic rubbers. Condensation polymers. Some important polymers: Natural and synthetic like polythene, nylon, polyesters, bakelite, and rubber |
Pollution: Environmental pollutants; soil, water and air pollution; chemical reactions in atmosphere; smog; major atmospheric pollutants; acid rain; ozone and its reactions; depletion of ozone layer and its effects; industrial air pollution |
Pollution: Greenhouse effect and global warming; green chemistry, study for control of environmental pollution |
Chemicals in medicine, health-care and food: Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, anti-fertility drugs, antihistamines, antibiotics, antacids; preservatives, artificial sweetening agents, antioxidants |
Chemicals in medicine, health-care and food: Soaps and detergents |
Theoretical principles of experimental chemistry |
---|
Volumetric analysis: Principles; standard solutions of sodium carbonate and oxalic acid; acid-base titrations; redox reactions involving KI, H2SO4, Na2SO3, Na2S2O3 and H2S; potassium permanganate in acidic, basic and neutral media |
Volumetric analysis: Titrations of oxalic acid, ferrous ammonium sulphate with KMnO4, K2Cr2O7/ Na2S2O3, Cu(II)/ Na2S2O3 |
Qualitative analysis of inorganic salts: Principles in the determination of the cations Pb2+, Cu2+, As3+, Mn2+, Al3+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+, NH4 +, Fe3+, Ni2+ |
Qualitative analysis of inorganic salts: Principles in the determination of the anions CO3 2-, S2-, SO4 2-, SO3 2-, NO2-, NO3-, Cl-, Br-, I-, PO4 3-, CH3COO-, C2O4 2- |
Physical chemistry experiments: Preparation and crystallization of alum, copper sulphate, benzoic acid ferrous sulphate, double salt of alum and ferrous sulphate, potassium ferric sulphate, temperature vs. solubility |
Physical chemistry experiments: Study of pH charges by common ion effect in case of weak acids and weak bases, pH measurements of some solutions obtained from fruit juices |
Physical chemistry experiments: Solutions of known and varied concentrations of acids, bases, and salts using pH paper or universal indicator, lyophilic and lyophobic sols, dialysis, role of emulsifying agents in emulsification |
Physical chemistry experiments: Equilibrium studies involving ferric and thiocyanate ions-(i) [Co(H2O)6] 2+ and chloride ions, enthalpy determination for strong acid vs. strong base neutralization reaction |
Physical chemistry experiments: Equilibrium studies involving ferric and thiocyanate ions-(ii) hydrogen bonding interaction between acetone and chloroform; rates of the reaction between-(i) sodium thiosulphate and hydrochloric acid |
Physical chemistry experiments: Rates of the reaction between-(ii) potassium iodate and sodium sulphite, (iii) iodide vs. hydrogen peroxide, concentration and temperature effects in these reactions |
Purification methods: Filtration, crystallization, sublimation, distillation, differential extraction, and chromatography. Principles of melting point and boiling point determination; principles of paper chromatographic separation-Rf values |
Qualitative analysis of organic compounds: Detection of nitrogen, sulphur, phosphorous and halogens; detection of carbohydrates, fats and proteins in foodstuff; detection of alcoholic, phenolic, aldehydic, ketonic, carboxylic |
Qualitative analysis of organic compounds: Amino groups and unsaturation |
Principles of organic chemistry experiments: Preparation of, acetanilide, p-nitro acetanilide, di-benzyl acetone, aniline yellow, beta-naphthol-aniline dye |
Basic laboratory technique: Cutting glass tube and glass rod, bending a glass tube, drawing out a glass jet, boring of cork |
English proficiency
Grammar |
---|
Determiners, prepositions, modals, adjectives, relative pronouns |
Agreement, time and tense |
Parallel construction |
Voice, transformation |
Question tags, relative clauses |
Vocabulary |
---|
Odd word, one word, spelling & word formation, homophones |
Contextual meanings of vocabulary (definitions, academic vocabulary, connotation) |
Synonyms, antonyms, collocations |
Phrasal verbs & idioms |
Analogy |
Reading comprehension |
---|
Content/ideas (finding main ideas, reaching conclusions using supporting evidence, anticipation of ideas, distinguishing facts from opinions) |
Vocabulary (figurative usage: Metaphors and similes; select CLOZE) |
Summary (findings from options the correct summary) |
Referents |
Reorganization of information (Jigsaw Reading) |
Composition |
---|
Rearrangement (word order; logical organization of paragraph) |
Paragraph & unity (identifying the correct topic sentence;) |
Linkers/connectives |
Logical reasoning
Verbal reasoning |
---|
Analogy: Analogy means correspondence. In the questions based on analogy, a particular relationship is given and another similar relationship has to be identified from the alternatives provided |
Classification: Classification means to assort the items of a given group on the basis of certain common quality they possess and then spot the odd option out |
Series completion: Here series of numbers or letters are given and one is asked to either complete the series or find out the wrong part in the series |
Logical deduction: Reading passage-Here a brief passage is given and based on the passage the candidate is required to identify the correct or incorrect logical conclusions |
Chart logic: Here a chart or a table is given that is partially filled in and asks to complete it in accordance with the information given either in the chart/table or in the question |
Nonverbal reasoning |
---|
Pattern perception: Here a certain pattern is given and generally a quarter is left blank. The candidate is required to identify the correct quarter from the given options |
Figure formation and analysis: Here the candidate is required to analyze and form a figure from the various given parts |
Paper cutting: Here the candidate analyses a pattern that is formed when a folded piece of paper is cut into a definite design |
Figure matrix: Here the candidate is given more than one set of figures in the form of a matrix, which follow the same rule. The candidate is required to follow the rule and identify the missing figure |
Rule detection: Here a particular rule is given and the candidate is required to select from the given sets of figures, a set of figures, which obey the rule and form the correct series |
Biology
Diversity in living world |
---|
Biology-its meaning and relevance to mankind |
What is living; taxonomic categories and aids; systematics and binomial system of nomenclature |
Introductory classification of living organisms (two-kingdom system, five-kingdom system) |
Plant kingdom-salient features of major groups (algae to angiosperms) |
Animal kingdom-salient features of non chordates upto phylum, and chordates up to class level |
Cell: The unit of life; structure and function |
---|
Cell wall; cell membrane; endomembrane system (ER, golgi apparatus/dictyosome, lysosomes, vacuoles); mitochondria; plastids; ribosomes; cytoskeleton; cilia and flagella; centrosome and centriole; nucleus; microbodies |
Structural differences between prokaryotic and eukaryotic, and between plant and animal cells |
Cell cycle (various phases); mitosis; meiosis |
Biomolecules-structure and function of carbohydrates, proteins, lipids, and nucleic acids |
Enzymes-chemical nature, types, properties and mechanism of action |
Genetics and evolution |
---|
Mendelian inheritance; chromosome theory of inheritance; gene interaction; incomplete dominance; codominance; complementary genes; multiple alleles |
Linkage and crossing over; inheritance patterns of hemophilia and blood groups in humans |
DNA-its organization and replication; transcription and translation |
Gene expression and regulation; DNA fingerprinting |
Theories and evidences of evolution, including modern Darwinism |
Structure and function-plants |
---|
Morphology of a flowering plant; tissues and tissue systems in plants; anatomy and function of root, stem (including modifications), leaf, inflorescence, flower (including position and arrangement of different whorls, placentation) |
Fruit and seed; types of fruit; secondary growth |
Absorption and movement of water (including diffusion, osmosis and water relations of cell) and of nutrients; translocation of food; transpiration and gaseous exchange; mechanism of stomatal movement |
Mineral nutrition: Macro- and micronutrients in plants including deficiency disorders; biological nitrogen fixation mechanism |
Photosynthesis-light reaction, cyclic and non-cyclic photophosphorylation; various pathways of carbon dioxide fixation; photorespiration; limiting factors |
Respiration-anaerobic, fermentation, aerobic; glycolysis, TCA cycle; electron transport system; energy relations |
Structure and function-animals |
---|
Human physiology, digestive system-organs, digestion and absorption; respiratory system-organs, breathing and exchange and transport of gases |
Body fluids and circulation-blood, lymph, double circulation, regulation of cardiac activity; hypertension, coronary artery diseases |
Excretion system-urine formation, regulation of kidney function |
Locomotion and movement-skeletal system, joints, muscles, types of movement |
Control and coordination-central and peripheral nervous systems, structure and function of neuron, reflex action and sensory reception; role of various types of endocrine glands; mechanism of hormone action |
Reproduction, growth and movement in plants |
---|
Asexual methods of reproduction |
Sexual reproduction-development of male and female gametophytes; pollination (types and agents); fertilization; development of embryo, endosperm, seed and fruit (including parthenocarpy and helminth) |
Growth and movement-growth phases; types of growth regulators and their role in seed dormancy, germination and movement |
Apical dominance; senescence; abscission; photoperiodism; vernalisation |
Various types of movements |
Reproduction and development in humans |
---|
Male and female reproductive systems |
Menstrual cycle; gamete production; fertilisation; implantation |
Embryo development |
Pregnancy and parturition |
Birth control and contraception |
Ecology and environment |
---|
Meaning of ecology, environment, habitat and niche |
Ecological levels of organization (organism to biosphere); characteristics of species, population, biotic community and ecosystem; succession and climax |
Ecosystem-biotic and abiotic components; ecological pyramids; food chain and food web |
Energy flow; major types of ecosystems including agroecosystem |
Ecological adaptations-structural and physiological features in plants and animals of aquatic and desert habitats |
Biodiversity and environmental issues-meaning, types and conservation strategies (biosphere, reserves, national parks and sanctuaries), air and water pollution (sources and major pollutants) |
Global warming and climate change; ozone depletion; noise pollution; radioactive pollution; methods of pollution control (including an idea of bioremediation); deforestation; extinction of species (hot spots) |
Biology and human welfare |
---|
Animal husbandry-livestock, poultry, fisheries; major animal diseases and their control |
Pathogens of major communicable diseases of humans caused by fungi, bacteria, viruses, protozoans and helminths, and their control |
Cancer; AIDS |
Adolescence and drug/alcohol abuse |
Basic concepts of immunology |
Plant breeding and tissue culture in crop improvement |
Biotechnology and its applications |
---|
Microbes as ideal system for biotechnology |
Microbial technology in food processing, industrial production (alcohol, acids, enzymes, antibiotics), sewage treatment and energy generation |
Steps in recombinant DNA technology-restriction enzymes, DNA insertion by vectors and other methods, regeneration of recombinants |
Applications of R-DNA technology in human health-production of insulin, vaccines and growth hormones, organ transplant, gene therapy |
Applications in industry and agriculture-production of expensive enzymes, strain improvement to scale up bioprocesses, GM crops by transfer of genes for nitrogen fixation, herbicide-resistance and pest-resistance including Bt crops |
There are various methods that the candidates use to get a good result in the BITSAT 2024 examination. Some concentrate on revision and some on the in-depth study of the syllabus, and much more. So the candidates should follow a better BITSAT 2024 preparation plan to ace the examination,
BITSAT 2024 Preparation Tips & Strategy:
Preparing for BITSAT 2024 requires a well-planned strategy, hard work, and dedication. Here are some preparation tips and strategies that can help you in cracking the BITSAT 2024 exam:
Understand the Syllabus: Before starting your preparation, make sure that you are aware of the complete syllabus for the BITSAT 2024 exam. Focus on the important topics and prioritize your preparation accordingly.
Time Management: Time management is crucial for success in BITSAT 2024. Allocate sufficient time to each section and practice regularly to improve your speed and accuracy.
Practice Previous Year Papers: Practicing previous year question papers and mock tests is an excellent way to improve your preparation for the exam. This will help you in understanding the exam pattern, marking scheme, and the level of difficulty.
Focus on Concepts: BITSAT 2024 is a concept-based exam, so it is essential to have a clear understanding of the fundamental concepts in Physics, Chemistry, and Mathematics. Practice solving problems and numericals to strengthen your concepts.
Improve English Proficiency: The English Proficiency and Logical Reasoning section is equally important as the other sections. Focus on improving your English language skills by reading books, newspapers, and magazines. Solve practice papers to improve your logical reasoning skills.
Stay Calm and Confident: It is essential to stay calm and confident during the exam. Avoid unnecessary stress and anxiety, and focus on the exam. Remember to take breaks and relax during your preparation.
Revision: Regular revision is necessary to retain the concepts and formulas in your memory. Make sure to revise all the topics regularly and solve practice questions to keep yourself on track.
The authorities have released the BITSAT 2024 exam pattern on the official website. Candidates can check the detailed BITSAT exam pattern 2024 in the official brochure. The exam pattern of BITS Pilani includes the mode of exam, number of questions, duration of exam, type of questions, marking scheme and more. The aspirants going to appear for the BITS Admission Test must check the BITSAT exam pattern 2024 below.
BITSAT Exam Pattern
Particulars | Specifications |
Mode of Exam | Online |
Parts | The question paper will be made up of four parts.
|
Part-wise number of questions |
|
Total Questions | 150 |
Exam Duration | 3 hours |
Question Type | Multiple Choice Questions (MCQs) |
Marking scheme | Correct Response : Each correct answer carries 3 marks Incorrect Response : For an incorrect answer, 1 mark will be deducted. |
The authorities will release the mock test for BITSAT 2024 to help candidates get familiar with the nature of the exam. The BITSAT 2024 mock test is a simulation of the actual BITSAT exam that helps candidates prepare for the exam effectively. The mock test provides an opportunity for candidates to get familiar with the BITSAT 2024 exam pattern, which includes the number of questions, marking scheme, and time duration. BITSAT mock test helps candidates in managing their time effectively, which is crucial for success in the actual exam. By practising the mock test, candidates can learn to allocate the right amount of time to each section and improve their overall speed and accuracy. Moreover, taking the BITSAT 2024 mock test helps candidates identify their strengths and weaknesses in various sections of the exam. This will allow candidates to focus more on the weaker sections and improve their overall score.
The authorities has released the BITSAT 2024 admit card for session 1 on May 16, 2024. The admit card of BITSAT 2024 have details like the name and roll number of the candidate, the date and time of the exam, the address of the exam centre, and guidelines related to the entrance exam. Steps to download the BITSAT exam 2024 admit card 2024 are given below.
How to download the BITSAT admit card 2024
Visit the BITSAT exam 2024 official website.
Log-in to the BITSAT 2024 admit card portal using User Id and password.
After successful log-in, click on the BITSAT admit card link.
The BITSAT hall ticket will be displayed on the screen
Download and take a printout of the same.
Details Mentioned on BITSAT 2024 Admit Card
On BITSAT 2024 admit card the following details will be mentioned:
Name of the Candidate.
Test Date and Time.
Exam Centre Venue.
Candidates' Sign and Photo.
Application Number.
Reporting Time.
BITSAT Exam Day Guidelines
Candidates must follow the exam day guidelines while appearing in the BITSAT 2024 examination.
Candidates are required to carry a BITSAT Admit Card and one photo ID proof at the exam centre.
Candidates must reach at least 30 minutes before the reporting centre.
Candidates must not carry any prohibited items like mobiles, digital calculators, pagers, rough sheets, etc to the examination hall.
In case of any system issues, candidates should immediately contact the exam invigilators in the examination hall.
The invigilators will provide the rough sheets for calculation and rough work purposes. Candidates will have to submit those sheets to the invigilator before leaving the exam hall.
No candidates will be allowed to leave the examination hall before the conclusion of the exam.
The BITSAT 2024 slot booking process is done online. During slot booking of BITSAT 2024, the candidate has to select the date, time, and exam centre. After the slot booking process, the BITSAT 2024 admit card will be generated. The candidates must note that the slots will be allotted on a first-come, first-served basis, so if a particular slot fills up it will no longer be available for the next candidate.
Steps to complete BITSAT Slot Booking 2024
Visit the BITSAT official website.
Click on the slot booking link from the page.
Login by using the Application Number and Password.
Choose a preferred test city for BITSAT 2024.
Check all details and click on the submit button.
You will receive a confirmation message after a successful slot booking.
BITSAT 2024 Exam Centers
State | City |
---|---|
Uttar Pradesh | Agra |
Allahabad | |
Ghaziabad | |
Gorakhpur | |
Lucknow | |
Noida | |
Kanpur | |
Gujarat | Ahmedabad |
Surat | |
Vadodara | |
Rajkot | |
Karnataka | Bangalore |
Mangalore | |
Madhya Pradesh | Bhopal |
Gwalior | |
Indore | |
Jabalpur | |
Odisha | Bhubaneswar |
Chandigarh | Chandigarh |
Tamil Nadu | Chennai |
Coimbatore | |
Madurai | |
Goa | Goa |
Haryana | Gurgaon |
Assam | Guwahati |
Dibrugarh | |
Telangana | Hyderabad |
Rajasthan | Jaipur |
Jodhpur | |
Pilani | |
Udaipur | |
Ajmer | |
Punjab | Jalandhar |
Mohali | |
Jammu and Kashmir | Jammu |
Jharkhand | Jamshedpur |
Ranchi | |
West Bengal | Kolkata |
Siliguri | |
Maharashtra | Mumbai |
Nagpur | |
Nashik | |
Pune | |
Aurangabad | |
Kolhapur | |
Bihar | Patna |
Chhattisgarh | Raipur |
Andhra Pradesh | Rajahmundry |
Tirupati | |
Vijayawada | |
Visakhapatnam | |
Uttarakhand | Roorkee |
Kerala | Thiruvananthapuram |
Mizoram | Aizawl |
Tripura | Agartala |
Documents Required at Exam
- Hall ticket
- ID proof
BITSAT 2024 Exam Analysis
The BITS Pilani will conduct the BITSAT 2024 as a computer based test. Students can check the previous year BITSAT exam analysis here based on student's reaction.
BITSAT Analysis 2023 May 24 (Shift 2) - Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate |
Physics | Easy |
English and logical reasoning | Easy to Moderate |
BITSAT Analysis 2023 May 24 (Shift 1)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate to difficult |
Physics | Moderate |
English and logical reasoning | Moderate |
BITSAT Analysis 2023 May 23 (Shift 2)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate to difficult |
Physics | Easy |
English and logical reasoning | Easy |
BITSAT Analysis 2023 May 23 (Shift 1)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate to difficult |
Physics | Easy |
English and logical reasoning | Moderate |
BITSAT Analysis 2023 May 22 (Shift 2)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate to difficult |
Physics | Easy |
English and logical reasoning | Moderate |
BITSAT Analysis 2023 May 22 (Shift 1)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate |
Physics | Easy |
English and logical reasoning | Easy to moderate |
BITSAT Analysis 2023 May 21 (Shift 2)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Difficult |
Physics | Easy |
English and logical reasoning | Easy to moderate |
BITSAT Analysis 2023 May 21 (Shift 1)- Difficulty Level
Subject | Difficulty Level |
Chemistry | Easy |
Maths | Moderate |
Physics | Easy |
English and logical reasoning | Easy to moderate |
After the completion of the test, the computer will announce the BITSAT 2024 result to the candidate. The candidates will be able to check the number of total correct answers and wrong answers, with the score in BITSAT result. After completion of the BITSAT exam, the candidate will be able to logout of the test only after entering the scored marks in the test window.
The Merit lists will be released separately for different courses – one for M.Sc and B.Tech courses, and the other for B.Pharm. Later, the exam authorities will release the iteration result of BITSAT 2024 consisting of admit list and wait list.
How to check BITSAT result 2024?
Visit the BITSAT official website.
Click on the result link.
Enter application number and password
Click on the submit button.
BITSAT result/scorecard will appear on the screen.
Download it as a PDF file.
The cutoff of BITSAT 2024 will be the minimum score that a candidate has to obtain to be eligible for admission at any of the BITS campuses. Candidates in order to have a good chance of admission will have to score at least equal to or more than the BITSAT cutoff 2024. Authorities will consider details like the number of available seats, applications received for admission, and scores of candidates to prepare for the cutoff of BITSAT.
The BITSAT 2024 cutoff will be released separately for different BITS institutes and courses. The cutoff of BITSAT will be released for each iteration or seat allotment round. Candidates must also note that each cutoff list will have two parts – a simple round-specific cutoff and a wait-list cutoff.
BITSAT cut off - Previous Year
The tables below show the last year's cutoff of BITSAT (institute-wise),
BITSAT 2023 Cutoff
Name of the course | BITS Pilani Cutoff | BITS Hyderabad Cutoff | BITS Goa Cutoff |
BE Computer Science | 331 | 284 | 295 |
BE Electronics and Communication | 296 | 265 | 267 |
BE Electronics and Electrical | 272 | 251 | 252 |
BE Electronics and Instrumentation | 266 | 244 | 244 |
BE Chemical | 224 | 209 | 207 |
BE Civil | 213 | 204 | |
BE Mechanical | 244 | 218 | 223 |
BE Manufacturing | 220 | - | - |
MSc Physics | 235 | 219 | 222 |
MSc Chemistry | 213 | 205 | 205 |
MSc Biological Sciences | 212 | 204 | 204 |
MSc Economics | 257 | 236 | 239 |
MSc Mathematics | 236 | 219 | 221 |
Mode of Counselling: Online
Registered candidates will be able to attend the BITSAT 2024 counselling in online mode. The counselling process of BITSAT 2024 comprises registration, filling of personal details, submission of qualifying exam marks, choice filling, payment of BITSAT counselling fee, and allotment of seats. The seat allotment of BITSAT 2024 will be released in the form of Iteration rounds. After each Iteration round, admission and waitlist will be published for the benefit of the candidate.
BITSAT 2024 Counselling Process
Step 1: Filling the personal details
Step 2: Submitting 12th qualifying examination subject wise marks
Step 3: Selection of colleges and course according to preference
Step 4: Payment of counselling fee
Step 5: Allotment of seats
NOTE: Candidates will have to report to their respective institutes within the specified dates to confirm their seats. For confirmation of the seat, they will have to pay the necessary fee and also finish the document verification process.
Direct Admission for Board Toppers
Apart from BITSAT 2024, candidates who have topped their respective boards (both central and state boards) will be given direct admission to the programme of their choice.
Documents Required at Counselling
10th standard/matriculation/secondary school certificate
12th standard/matriculation/secondary school certificate
BITSAT admit card
BITS admission application form
BITSAT result
Documents Required at Counselling
- 10th standard/matriculation/secondary school certificate
- 12th standard/matriculation/secondary school certificate
- BITSAT admit card
- BITS admission application form
- BITSAT result
General Information
Frequently Asked Questions (FAQs)
Question:When is the BITSAT 2024 application starting?
Answer:
The authorities released the BITSAT 2024 application form on January 15.
Question:What is BITSAT exam eligibility?
Answer:
Candidates have to pass the 10+2 exam with Physics, Chemistry, Mathematics / Biology from a recognized board. Moreover, candidates must have secured an aggregate of 75% marks with at least 60% marks in Physics, Chemistry, Mathematics / Biology.
Question:What is BITSAT exam used for?
Answer:
Candidates who wish to get admission to the engineering courses offered on the campuses of BITS Pilani have to appear for the BITSAT exam.
Question:How can I check my BITSAT 2024 seat allotment result?
Answer:
Candidates will be able to check it by logging in to the official website of BITSAT 2024 by using a valid application number and password.
Question:How the BITSAT 2024 counselling be conducted?
Answer:
The counselling of BITSAT will be conducted in online mode only. Candidates need to pay the required fee during the counselling and seat allotment process.
Question:What are the determining factors of BITSAT cutoff?
Answer:
The cutoff of BITSAT will be determined based on factors includes the difficulty level of the exam, the previous year’s cutoff trend, and the highest score in the test.
Question:What is the BITSAT 2024 marking scheme?
Answer:
Three marks will be given for correct answers and one mark is reduced for incorrect responses.
Question:Will BITS Pilani publish the BITSAT 2024 answer key?
Answer:
BITS does not issue the answer key of BITSAT. If it is released in the upcoming session, the same will be updated here.
Question:Can any candidate change his/her test centre after the completion of BITSAT 2024 slot booking?
Answer:
No, candidates cannot change the BITSAT exam centre after the slot booking process.
Question:When will BITSAT exam 2024 be held?
Answer:
The authorities released the BITSAT exam 2024 dates. BITSAT session I will be held from May 20 to 24, while session II will be held from June 24 to 28, 2024.
Question:When will BITS Pilani release the BITSAT 2024 notification?
Answer:
BITSAT 2024 official notification released on January 14.
Question:When will BITSAT result be announced?
Answer:
Candidates can check their score in BITSAT exam right after the completion of test using their login portal.
Question:What will be the total number of questions in BITSAT 2024?
Answer:
BITSAT exam consists of 130 questions.
Question:What was the previous year's cutoff of BITSAT?
Answer:
To be eligible for admission, candidates will be required to score at least 240 in BITSAT.
Question:How can I check my BITSAT 2024 application form status?
Answer:
To check the status of the application form, candidates will have to log in to the BITS admission portal 2024 using the details like email id, mobile number, and date of birth.
Question:What to do in case of any discrepancy in the admit card of BITSAT 2024?
Answer:
In case of any discrepancy in the BITSAT 2024 admit card, candidates are advised to contact the examination authorities.
Admissions Office, BITS, Pilani, Rajasthan, India, Pin - 333 031
Telphone: 01596-242205, 255294, 255330
Question:How can I book a slot for BITSAT 2024?
Answer:
To book a slot, applicants have to log in to the BITS 2024 admission portal using the application number and password. Click on the "Book Slot" tab and select the date, time, and venue of the exam.
Question:How can I edit BITSAT 2024 application form, if have made some errors?
Answer:
The authorities provide the BITSAT application form correction facility on the official website. Candidates can edit and correct their BITSAT 2024 application form in case they make mistakes while filling the application form using this facility.
Questions related to BITSAT
I got 90 in physics, 93 in chemistry but 57 in maths, am I eligible for bitsat exam
Hello!
The minimum marks required in class 12 examination for BITSAT is aggregate 75% marks in Physics, Chemistry, and Mathematics subjects (if the student has taken Mathematics in BITSAT) or the same in Physics, Chemistry, and Biology subjects (if the student has taken Biology in BITSAT). In addition, the student must also score at least 60% marks in each of the Physics, Chemistry, and Mathematics/ Biology subjects.
Since, you have scored only 57 marks in Mathematics, you are not eligible for this exam.
Please visit the website by clicking on the link given below for more information:
https://engineering.careers360.com/articles/bitsat-eligibility-criteria
Hope this information will help you. Best wishes ahead!
can I write nios a year after passing 12th and is it acceptable for jee and BITSAT
Yes, you can write the NIOS exam a year after passing 12th standard. There is no restriction on appearing for NIOS based on the gap since your previous 12th board exams. NIOS qualification is perfectly acceptable for JEE Mains. You just need to meet the eligibility criteria, which includes passing 10+2 with Physics, Chemistry, and Mathematics. JEE Mains considers the year of your first attempt at 12th board exams (NIOS or any other board) to determine eligibility. You can only appear for JEE Mains for three consecutive years after that first attempt year.
Similar to JEE Mains, BITSAT also accepts NIOS qualifications. BITSAT eligibility is based on the year you passed or appeared for your 12th board exams (current year and previous year). So, you can appear for BITSAT the year you take the NIOS exam and the following year as well.
https://www.careers360.com/exams/bitsat
I hope it helps!
I got 41 percentile in jee mains session 1. If i will start my preparation now onwards for BITSAT can I get or should I prepare again for JEE main.
Hello student,
I would suggest that you start upgrading your preparation for JEE Main second session. BITSAT questions are easier than JEE Main and require recollection of the appropriate formulae. The questions asked in JEE Main are more conceptual and require deep knowledge of concepts and techniques. So, a student preparing for JEE Main can easily appear for the BITSAT exam as well. The major difference in the syllabus of the two exams is the presence of English Proficiency and Logical Reasoning in the BITSAT.
What you can do is, alongwith JEE Preparation, you can also start preparing for Eng. and logical reasoning. That ways, you’d be easily able to cover both the exams.
While JEE Main is for admission in government engineering colleges, central and also for several states. BITSAT is only for the various campuses of one of the private colleges in India. So JEE definitely opens up more options.
If you want to check your rank range based on your percentile, then you can refer to the Careers360 JEE Main Rank Predictor: https://engineering.careers360.com/jee-main-rank-predictor?
If you need more information regarding which colleges you would be eligible for based on your marks and details, then you can refer to the Careers360 JEE Main College Predictor: https://engineering.careers360.com/jee-main-college-predictor?
Hi sir... if I complete my 12th in BOSSE( Board of open schooling and skill education sikkim) can I write bits exam and eligible to take bitsat seat ...pls suggest
Hello aspirant,
Hope you are doing great.
So coming to your question, YES, you are completely eligible to give the BITSAT exam. Recently the government has approved that open schooling is equal to regular schooling and students who have passed through open schooling are completely eligible for the entrance exams such as BITS, JEE Mains etc.
Hope this helps!
though I get a rank 200 in bitsat exam if I am not eligible in the criteria 75% am I not eligible for admission
Hello aspirant,
Qualifications for BITSAT:
- The class 12 or equivalent test (from any state or central board of school education) must have been passed by the candidates.
- In the qualifying exam, they had to have received at least 75% of the possible points in Physics, Chemistry, and Mathematics/Biology.
- They should have received 60% grades in each of the three topics individually in addition to the 75% total.
So if you will not get 75% you will not be eligible.
Thank you
Hope this information helps you.